軟管泵的軟管設計：工業軟管泵的軟管經過特殊設計優質材料，能反復壓縮，不應與“普通軟管”混淆。有些軟管是由均勻的擠壓材料制成的，而另一些軟管有一層增強纖維內層，以增加軟管的剛度，并確保軟管在未壓縮時具有圓形截面。當擠壓管的擠壓回彈達到不合格范圍時，需要及時更換擠壓泵軟管，即使不壓縮也會使軟管保持橢圓。對于內襯軟管設計，這種“軟管疲勞”終可能導致內部開裂或分層。 在軟管完全失效之前更換，以防止工藝流體泄漏到泵中，并可能流出泵。                  

眾所周知軟管泵在運行時，是通過一根U型附有彈性的橡膠軟管來完成輸送。今天小編需要強調的是，軟管存放時間不宜過長，一般以一年為限。在停工期間，對裝有軟管的泵，若長期不用，每隔一個月需轉動泵一次。以免壓輥長時間壓在泵管的某一處，減弱管子回彈性，影響其流量的輸送。

It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.